Tenda AC11 User Manual

46
5.6 WPS
The WPS function enables wireless devices such as smartphones to connect to WiFi networks of
the router quickly and easily.
To access the page, log in to the web UI of the router and choose Wireless Settings > WPS.
This function is only applicable to WPS-enabled wireless devices.
5.6.1 Connect to the WiFi network using the WPS button
Step 1 Press the WPS button on the router. If there is only one LED indicator, the LED indicator
blinks fast, such as AC8; if the router has more than one LED indicator, the WiFi LED
indicator blinks slowly, such as AC11.
Step 2 Configure the WPS function on your wireless devices within 2 minutes. Configurations on
various devices may differ (Example: HUAWEI P10).
1. Find Settings on the phone.
2. Choose WLAN.
3. Tap , and choose WLAN settings.

Tenda AC11 Specifications

General

Max WiFi Speed	1200 Mbps
Frequency Bands	2.4 GHz, 5 GHz
RAM	128 MB
MU-MIMO	Yes
WiFi Standard	IEEE 802.11ac
Wireless Standards	IEEE 802.11ac/a/n/g/b
Wireless Speed	300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
Antennas	5 external antennas
Ports	1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports
Interface	Web-based Interface
Button	WPS/Reset
Security	WPA-PSK/WPA2-PSK
Power Input	100-240V AC, 50/60 Hz