Tenda AC11 User Manual

44
Parameter
Description
Wireless
Channel
It specifies the operating channel of a WiFi network.
By default, the wireless channel is Auto, which indicates that the router selects a channel for the
WiFi network automatically. You are recommended to choose a channel with less interference
for better wireless transmission efficiency. You can use a third-party tool to scan the WiFi signals
nearby to understand the channel usage situations.
Wireless
Bandwidth
It specifies the bandwidth of the wireless channel of a WiFi network. Change the default settings
only when necessary.
⚫
20: It indicates that the channel bandwidth of a router is to 20 MHz.
⚫
40: It indicates that the channel bandwidth of a router is 40 MHz.
⚫
20/40: It specifies that a router can switch its channel bandwidth between 20 MHz and 40 MHz
based on the ambient environment. This option is available only at 2.4 GHz.
⚫
80: It indicates that the channel bandwidth of a router is 80 MHz. This option is available only
at 5 GHz.
⚫
20/40/80: It specifies that a router can switch its channel bandwidth among 20 MHz, 40 MHz,
and 80 MHz based on the ambient environment. This option is available only at 5 GHz.

Tenda AC11 Specifications

General

Max WiFi Speed	1200 Mbps
Frequency Bands	2.4 GHz, 5 GHz
RAM	128 MB
MU-MIMO	Yes
WiFi Standard	IEEE 802.11ac
Wireless Standards	IEEE 802.11ac/a/n/g/b
Wireless Speed	300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
Antennas	5 external antennas
Ports	1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports
Interface	Web-based Interface
Button	WPS/Reset
Security	WPA-PSK/WPA2-PSK
Power Input	100-240V AC, 50/60 Hz