Name: Tenda D301-V2
Brand: Tenda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Wireless Modem Router

Here you can configure the WAN DNS address:

-Click the Select DNS Server Interface from available WAN interfaces option

-Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system

And then click Next.

_________________________________________________________________________________________________

Note:

1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used

according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is

connected. Priority order can be changed by removing all and adding them back in again.

2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses

must be entered.

3. If you cannot locate the static DNS server IP information, ask your ISP to provide it.

_________________________________________________________________________________________________

Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set.

Questions and Answers:

Need help?

Do you have a question about the Tenda D301-V2 and is the answer not in the manual?

Tenda D301-V2 Specifications

General