Name: Tenda D301-V2
Brand: Tenda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Wireless Modem Router

Edit the Enter Service Description. This field is optional. We recommend that you keep the default.

Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).

Click Next.

PPP Username: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it.

PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it.

Authentication Method: This is used by ISP to authenticate the client that attempts to connect. If you are not sure,

consult your ISP or select Auto.

Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet service bill.

Enable PPP Debug Mode: Only enable this feature if supported by your ISP.

Bridge PPPoE Frames Between WAN and Local Ports: If enabled, PPPoE dialup frame from LAN side will directly

egress the WAN port without modification.

Multicast Proxy: If enabled, the router will use multicast proxy.

If you are not sure about the options on this screen, simply enter your ISP user name and password and leave the other

options unchanged from defaults. Click Next to enter the following screen.

Questions and Answers:

Need help?

Do you have a question about the Tenda D301-V2 and is the answer not in the manual?

Tenda D301-V2 Specifications

General