Tenda D305 - Page 127

122
 Enter the MAC address of Router 1 which you have noted down (00:90:4C:11:22:53).
 Then click Apply/Save to save the settings.
b. If you select Enable(Scan) in Bridge Action field.
 Select the SSID of Router 1 (Tenda_112252) in Remote Bridges MAC Address field.
 If you cannot find the SSID on the list, click Refresh to refresh the list.
 Then click Apply/Save to save your settings.
 Wireless Bridge
Two ways to bridge Router 1 by using Wireless Bridge:
a. If you select Enable in Bridge Action field.
 Enter the MAC address of Router 1 which you have noted down (00:90:4C:11:22:53).
 Then click Apply/Save to save the settings.