Tenda FH456 - Page 42

Specify Additional Settings
38
Mode
Compatibility
Wireless Speed
11b/g/n
Allows 802.11b, 802.11g, and 802.11n devices to join the network.
Up to 300 Mbps
11b/g
Allows 802.11b and 802.11g devices to join the network.
Up to 54 Mbps
11b
Allows 802.11b devices to join the network.
Up to 11 Mbps
11g
Allows 802.11g devices to join the network.
Up to 54 Mbps
Wireless Channel
To change the wireless channel, select one from the Wireless Channel list. Do not change the channel
unless you experience interference (shown by lost wireless connection or slow data transfers). If this
happens, experiment with different channels to see which the best is. The recommended channel
spacing between adjacent access points is four channels (for example, use channel 1 and 5, or 6 and
10).
Channel Width
Select any of these channel widths to accommodate higher transmission speeds:
 Auto: When the channel width is Auto, the channel width will switch among 20MHZ and
40MHZ according to the situation of the current wireless network. The channel width is set to
Auto by default. Keep the default unless you encounter some issues with your wireless