Specify Additional Settings
❶ Check the Enable option to enable the feature.
❷ Select Custom and type the remote IP Address in the box: 202.165.100.105 here.
If you don’t know the WAN IP of your company’s network, you can select Anyone here.
8080 is the default port number of remote Web management. Don’t change the default settings if
unnecessary.
Click OK on the bottom of the page to activate the settings.
Verification
When you’re in the company, you can use your computer to access your Router’s User Interface by
entering http://190.136.2.5:8080 in a browser.
Remote Web Management + DDNS
However, in the example above, the WAN IP of the Router in your home may be dynamic. You can
give the WAN IP a static host name via DDNS to maintain the connection between your Router and
the computer in your company. Go to “DDNS” for details to configure a username, password, and
domain name.
Assume you signed up an account tenda01.dyndns.org from dyndns.org, the username is tenda01,
and the password is 1234567890.
After you bind a static hostname to the WAN IP, when you’re in the company, you can also access
To Next Page
Loading...
