Tenda N301

2
1.2.2 Ports and buttons
Button/Port
Description
WiFi/RST
WiFi on/off button and reset button.

Hold the button down for 1~3 seconds to turn on or off the WiFi network of the router.

Hold the button down for about 8 second, then release when the LED indicator blinks
fast. The router is reset successfully.
LAN1/2/3
Used to connect to the wired devices such as computers or switches.
WAN
Used to connect this router to the internet.
PWR
Used to connect to the included power adapter.
1.2.3 Label
The bottom label shows the SSID, login IP address, serial number and MAC address of the router.
See the following figures:
IP Address: It is the default address used to log in to the web UI of the router.
MAC: It specifies the MAC address of the router.
SSID: It specifies the default WiFi name of the router.
S/N: If there goes something wrong with your device and you need to send it to our technical staff
for repair, you will need this sequence number.