EasyManuals Logo

Tenda P200 User Manual

Tenda P200
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
P200 200Mbps PowerLine Mini Adapter
4
Management utility allows you to manage all Tenda Powerline adapters
on the network.
1 x 10/100Mbps Auto-MDIX Fast Ethernet port
1 x Pair/Reset button to quickly establish a secured private Powerline
network
Power Saving mode reduces electrical consumption down to 0.5W
Advanced 128-bit AES encryption to ensure total network security
1.5 Safety Considerations
Observe the following to avoid any potential harm caused from improper
use.
DO NOT expose the device to flammable , conductive or humid objects;
Make sure there is no worn-out electric wire and other appliances are
stably placed.
Operate it in a well-ventilated environment.
DO NOT expose the device to sun shine or other heat sources;
DO NOT expose the device to corrosive substances (such as acid and
alkali, etc)
Connect the device to a wall outlet that matches rated power
requirements.
Input voltage fluctuation should be less than 10%. For optimal result,
connect the device to a regular wall outlet without any other devices
like hair drier, electric iron, fridge or charger connected to the same
outlet.
Read the Quick Installation Guide before using the device.
Note all safety instructions stated in both user guide and quick
installation guide.
Use of accessories that are not included to this product may cause fire or
damage.
DO NOT place any objects on the device.
DO NOT expose the device to water. Keep it clean.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda P200 and is the answer not in the manual?

Tenda P200 Specifications

General IconGeneral
Wi-FiNo
Power plug-
Ethernet LANYes
Security algorithms128-bit AES
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate200 Mbit/s
Ethernet LAN interface typeFast Ethernet
CertificationCE, FCC
Product colorWhite
LED indicatorsLAN, Power
Sustainability certificatesRoHS
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)3 - 90 %
Operating relative humidity (H-H)10 - 90 %
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth27 mm
Width53 mm

Related product manuals