Tenda PH10 User Manual

18
Parameters Description
Parameter
Description
Guest Network
Click this button to enable/disable the guest network.
2.4G Wi-Fi Name/5G
Wi-Fi Name
It specifies the wireless network name at 2.4 GHz/5 GHz.
Wi-Fi Password
It specifies the wireless password for 2.4 GHz wireless network and 5 GHz wireless
network.
Use 2.4G Wi-Fi name
Select this option to change 5 GHz wireless network to the same as that of 2.4 GHz
wireless network.
User Isolation
Enable: if the “Enable” option is selected, wireless devices connected to the guest
network cannot communicate with each other.
Disable: if the “Disable” option is selected, wireless devices connected to the guest
network can communicate with each other.
4.5 Powerline
The Powerline page allows you to check or change powerline network parameters.
Choose Powerline to enter the configuration page.

Tenda PH10 Specifications

General

Ethernet LAN	Yes
Certification	CE, FCC
Product color	White
LED indicators	Power, WLAN
Frequency range	2 - 86 MHz
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Antennas quantity	2
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of adapters included	1 pc(s)
Sustainability certificates	RoHS
WLAN data transfer rates supported	200, 433 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85171800