Tenda PH10 - System Settings and Maintenance

19
Parameters Description
 Powerline Network Settings
Parameter
Description
Network Name
It specifies the name of the powerline network where PA7 resides. The default
powerline network name is HomePlugAV which indicates an unencrypted powerline
network.
 The powerline devices that share a same network name belong to a same
powerline network. And the powerline devices in different powerline networks
cannot communicate with each other.
 Powerline devices which are compliant with HomePlugAV standard can
establish an unencrypted powerline network named HomePlugAV.
Default
Clicking Default button restores the default powerline network name.
MAC Address
It specifies the MAC address of this PA7.
 Powerline Device List
Parameter
Description
Device Name
It specifies the name of the powerline device. You can change this name if there are
multiple powerline devices in the powerline network for easy recognition.
MAC Address
It specifies the MAC address of the powerline device.
Tx Rate
It specifies the transmission rate of the powerline device.
Rx Rate
It specifies the receiving rate of the powerline device.
4.6 System Settings
4.6.1 Changing the Login Password
The Login password is used to log in to the web UI of PA7. The default one is admin.
Perform the following steps if you want to change it.
Step 1 Choose System, and move to the Login Password part.