Need help?Do you have a question about the Tenda A301 and is the answer not in the manual?
General| Type | Network transmitter |
|---|---|
| Maximum transfer distance | - m |
| Antennas quantity | 2 |
| Wi-Fi | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Security algorithms | WEP, WPA-PSK, WPA2-PSK |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Wi-Fi data rate (max) | 300 Mbit/s |
| RJ-45 ports quantity (transmitter) | 1 |
| Output current | 0.7 A |
| Output voltage | 5 V |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | -40 - 70 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Certification | CE, FCC |
| Sustainability certificates | RoHS |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 55 mm |
| Height | 39 mm |
Provides a general introduction to the Tenda A301 WiFi extender.
Details the device's indicators, buttons, and labeling for identification, including LEDs, buttons, and labels.
Guides users on how to access the extender's interface using a mobile device.
Explains how to view the extended status and signal strength on the extender's homepage.
Guides on changing the extender's WiFi network name (SSID) and password.
Instructions for hiding the extender's WiFi network to improve security.
Provides tools to view and manage connected clients on the extender.
Explains how to block specific devices from accessing the extender's network.
Procedure for unblocking devices that were previously denied access.
Instructions for connecting the extender to a different WiFi network.
Details changing the extender's operating mode between Repeater and AP, including specific steps for each switch.
Guides on setting a secure login password for the extender's interface.
Instructions for restarting the extender to apply settings or resolve issues.
Procedure to restore the extender to factory defaults via Web UI or the RESET button.
Describes extending WiFi using the extender's web interface and a smart device.
Details the process of extending WiFi using the WPS button for quick setup.
Guides on accessing the extender's interface using a laptop or desktop computer.
Explains how to view the internet status and signal strength via the Web UI.
Overview of managing connected devices, including viewing and blocking.
Instructions for blocking specific devices from accessing the extender's network.
Procedure for unblocking devices that were previously denied access.
Steps to reconfigure the extender to connect to a different WiFi network.
Guides on changing the extender's WiFi network name (SSID) and password.
Instructions for hiding the extender's WiFi network to improve security.
Details changing the extender's operating mode between Repeater and AP, including specific steps for each switch.
Procedure to set or change the login password for accessing the extender's settings.
Instructions for restarting the extender to apply settings or resolve issues.
Procedure to restore the extender to factory defaults via Web UI or the RESET button.
How to export system logs for troubleshooting or analysis.
Instructions on how to update the extender's firmware to the latest version.
Guides on configuring computer network settings for automatic IP acquisition on Windows 7 and 10.
Lists the default configuration settings and parameters for the extender.
To Next Page
