5
Step 3 After the smart plug is connected to the extender, the Internet Settings page pops up.
Select the WiFi network you want to extend, which is Tenda_01 in this example.
If the Internet Settings page does not pop up, check whether the smart phone has connected to the
default WiFi network named Tenda_EXT of the extender. If not, start a web browser on the device, and
visit re.tenda.cn.
Step 4 Enter the WiFi Password of the WiFi network you selected, modify the SSID of extender
as needed, which is Tenda_01_EXT in this example, and tap Done.
To Next Page
Loading...
