Wireless N150 Long Range AP/Router
34
!
Ø DHCP!Server:!enable!or!disable!the!device’s!DHCP!server!feature.!If!enabled,!
the!DHCP!server!will!assign!IP!addresses!to!requesting!clients!
Ø Start! IP! Address:! Specify! the! starting! IP! address! for! the! DHCP! server! IP!
assignment!
Ø End! IP! Address:! Specify! the! ending! IP! address! for! the! DHCP! server! IP!
assignment!
Ø Primary!DNS!Server:!Specify!a!primary!DNS!address!for!requesting!clients!
Ø Secondary! DNS! Server:! Specify! a! secondary! DNS! address! for! requesting!
clients.!This!field!is!optional!
Ø Lease!Time:!The!length!of!time!for!the!IP!address!lease.!Configuring!a!proper!
lease!time!improves!the!efficiency!for!the!DHCP!server!to!reclaim!disused!IP!
addresses!
Ø For! example:!If!the!lease!time!is!set!to!one!hour,!then!the!DHCP!server!will!
reclaim!disused!IP!addresses!every!hour!
!
3.5!WAN!Medium!Type!
Here!you!can!select!a!proper!WAN!medium!type!to!use:!Wireless!WAN!(WISP)!or!
Wired!WAN!to!connect!to!the!uplink!device.!Internet!connection!types!are!the!same!
for!the!two!medium!types.!
Ø Wired!WAN:!Connect!to!uplink!device!via!an!Ethernet!cable!
Ø Wireless!WAN:!Connect!to!uplink!device!(WISP!AP)!wirelessly!
Please!do!following!the!steps!as!below!if!you!connect!to!the!Internet!wirelessly.!
!
1. Select! Wireless! WAN! (WISP)! and! click! Scan.! Currently! available! wireless!
networks!will!then!be!displayed.! !
!
!