11N Wireless Broadband Router
11b/g mode：Allow the 11b/g-compliant client device
to connect with the AP with auto-negotiation speed, and
11n wireless client to connect the device with 11g
speed.
11b/g/n mode：Allow 11b/g/n-compliant client device
to connect with the AP with auto-negotiation speed.
SSID
：
SSID (Service Set Identifier) is the unique name
of the wireless network. This device has two SSID and
the SSID is necessary.
Broadcast (SSID): Select “Enable” to enable the
device's SSID to be visible by wireless clients. The
default is enabled.
BSSID
：
Basic Service Set Identifier of wireless network.
In IEEE802.11, BSSID is the MAC address of wireless
access point.
Channel
：
Specify the effective channel (from 1 to
13\Auto) of the wireless network.
Extension Channel
：
To increase data throughput of
wireless network, the extension channel range is used in
11n mode.
Channel Bandwidth：Select the channel bandwidth to
improve the wireless performance. When the network
has 11b/g and 11n clients, you can select the 40M;
when it is an 11n network, select 20/40M to improve its
throughput.
27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
