Wireless N300 Home Router
53
Chapter 6 Special Applications
6.1 Port Range Forwarding
Port range forwarding is useful for web servers, ftp servers, e-mail servers,
gaming and other specialized Internet applications. When you enable port
forwarding, the communication requests from the Internet to your router’s
WAN port will be forwarded to the specified LAN IP address. As seen in the
figure above, to let PC3 access service ports on PC1, you must first configure
port forwarding settings on the router to which PC1 is uplinked.
1. Start/End Port: Specify a range of ports between 1~65535 (for a
single port, enter the port number in both Start and End fields, say, 21
To Next Page
Loading...
