Wireless N300 Home Router
61
1. Filter Mode: Select a proper filter mode, say, Forbid Only (or
Forbid/Deny).
2. Access Policy: Select an access policy number, say, 1, from the
drop-down list.
3. Policy Name: Briefly describe the current rule (It can only consist of
numbers, letters, or underscore).
4. MAC Address: Specify a MAC address for a corresponding MAC filter
rule to apply to.
5. Time: Specify a time period for a current rule to take effect. If the field
is set to 0:00-0:00, the rule will be applied 24hrs/day.
6. Day(s): Select a day or several days for a current rule to take effect. If
Sun-Sat is selected, the rule will apply 7days/week.
7. Enable: Check/uncheck to enable/disable the feature.
8. OK: Click to activate your settings.
For Example:
To allow a PC at the MAC address of 00:E4:A5:44:35:69 to access Internet
from Monday to Friday.
To Next Page
Loading...
