Tenma 72-3555 - Table of Contents

2
CONTENTS
Page Number Details
3 What’s Included
3 Important Safety Information
3 Introduction
4 Key Features
4 Product Overview
6 Rear Panel
7 AC Power Receptacle
9 Start
10 Setting DC Offset Voltage
10 Setting the Square Wave
11 Setting the Pulse Waveform
11 Setting DC Volts
12 Setting the Ramp Waveform
12 Setting the Noise Waveform
12 Frequency Measurement
12 Using the Built-in Help System
13 Advanced Applications - Outputting Modulated Waveforms
15 Setting Modulation Shape Frequency
17 Frequency Modulation (FM)
19 Setting Modulation Shape Frequency
21 Phase Modulation (PM)
23 Setting Phase Deviation
25 Amplitude-Shift Keying (ASK) Modulation
28 Frequency-Shift Keying (FSK) Modulation
32 Phase-Shift Keying (PSK) Modulation
35 Pulse Width Modulation (PWM)
39 Outputting Frequency Sweep Waveforms
43 Outputting Impulse Train
49 Outputting Arbitrary Waveforms
51 Troubleshooting
52 Updating the Generator
52 Default Settings
54 Technical Specication