EasyManua.ls Logo

Tenma 72-3555 - Pulse; Gaussian Noise; Arbitrary Waveform Characteristics; Modulation Types

Tenma 72-3555
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
Pulse
Frequency range 500µHz~5MHz
Resolution 1µHz
Pulse width 40ns~2000s
Variable edge 20ns~2ms (typical 24ns)
Overshoot (typical) <2%
Jitter 1ns + 100ppm of period
Gaussian Noise
Bandwidth Bandwidth 25MHz (-3dB) typical value
DC Offset
Range (peak AC + DC) ±5V (50Ω)
Offset accuracy
Arbitrary Waveform Characteristics
Frequency range 1µHz~5MHz
Resolution 1µHz
Waveform length 2~8,000 points
Vertical resolution 14 bits (including sign)
Sample rate 125MSa/s
Min. rise/fall time 35ns, typical
Jitter (RMS, typical) 15ns + 100ppm
Non-volatile memory 48 waveforms
Waveform Output
Impedance 50Ω typical
Insulation Max. 42Vpk to earth
Protection
Short-circuited protection, all front BNC
output only
MODULATION TYPES
AM
Carrier waveforms Sine, Square, Ramp, Arbitrary
Source Internal/External
Modulating waveforms Sine, Square, Ramp, Noise, Arbitrary
Modulating frequency 2MHz~50kHz
Modulating depth 0%~120%