Tennant T2 Manual

ENGLISH
Tennant T2 (08--11)
15
MACHINE MAINTENANCE
To keep the machine in good working condition, follow
the machine maintenance procedures.
W ARNING: Electrical Hazard. Disconnect
Battery Cables Before Servicing Machine.
DAILY MAINTENANCE
1. Drain and rinse out the recovery tank (Figure 34).
FIG. 34
2. Remove the debris tray and empty (Figure 35)
FIG. 35
3. Remove and clean the float shut--off screen located
in the recovery tank (Figure 36).
FIG. 36
4. Drain the solution tank (Figure 37)
FIG. 37
5. Remove the pad/brush and clean. Rotate pad or
replace when worn (Figure 38).
FIG. 38
6. Wipe the squeegee blades clean (Figure 39).
When machine is not in use, raise squeegee
assembly off floor or hang on storage bracket.
FIG. 39

Tennant T2 Specifications

General

Cleaning Path	17 in / 430 mm
Power Source	Battery
Sound Level	68 dBA
Battery Run Time	Up to 3 hours
Machine Type	Walk-Behind Scrubber
Brush Deck Width	17 in / 430 mm
Battery Voltage	24 V