To Next PageTo Next PageWhy Tennant T5 Scrubber machine will not operate?
The Tennant Scrubber may not operate due to several reasons: * Discharged batteries: Charge the batteries. * Emergency-stop button activated: Turn the button clockwise to reset. * Faulty batteries: Replace the batteries. * Loose battery cable: Tighten the cable.
Why won't my Tennant T5 operate?
If your Tennant Scrubber won't operate, several issues could be the cause. First, ensure the batteries are charged. If the emergency-stop button is activated, turn it clockwise to reset it. Check for loose battery cables and tighten them if necessary. Faulty batteries may also be the reason, so consider replacing them.
Why Tennant T5 machine will not propel?
The Tennant Scrubber may fail to propel if the parking brake is set. Release the parking brake lever to resolve this. Also, avoid steep inclines and reset the key if you have exceeded the maximum incline.
How to fix onboard battery charger if it will not operate on Tennant T5?
If the onboard battery charger of your Tennant Scrubber isn't working, check if the plug is properly connected to the power supply. If not, ensure a proper connection. Also, replace the charger fuse if it's faulty, or replace the power supply cord if it's faulty.
How to improve water pickup on Tennant Scrubber?
If your Tennant Scrubber isn't picking up water effectively, start by draining the recovery tank, as it might be full or have excessive foam buildup. Check for a loose drain hose cap and tighten it. Clean the float shut-off screen located in the recovery tank, as well as the squeegee assembly. Inspect the squeegee blades for wear and replace or rotate them if needed. Adjust the squeegee blade height if the deflection is incorrect. Ensure all vacuum hose connections are secure and that the vacuum hose isn't clogged or damaged. Verify the recovery tank cover is properly positioned and the seal isn't damaged, replacing if necessary.
How to improve scrubbing performance of my Tennant Floor Machine?
If your Tennant Floor Machine's scrubbing performance is lacking, start by checking the brush for any caught debris and remove it. If the brushes or pads are worn, replace them. Also, verify that the brush pressure setting is correct and adjust it if needed. Finally, ensure you are using the correct type of brush or pad for your cleaning task.
What to do if FaST System of Tennant Floor Machine does not operate correctly?
If the FaST system on your Tennant Floor Machine model isn't working correctly, first ensure the FaST system switch is turned on. Check that the FaST--PAK supply hose is properly connected. If the hose or connectors are clogged, soak them in warm water to unclog them. Replace the FaST--PAK carton if it's empty. Make sure there are no kinks in the FaST--PAK supply hose. Also, drain the solution tank, remove the solution tank filter, clean and reinstall it.
What to do if brush motor(s) will not operate on Tennant T5 Scrubber?
If the brush motor(s) on your Tennant Scrubber are not working, consider the following: * Ensure the 1-STEP scrub button is on; if it's off, turn it on. * If you have a cylindrical brush model, check for a broken or loose belt; replace or tighten it as necessary. * Discharged batteries: Charge the batteries.
Why is there little or no solution flow in my Tennant Scrubber?
If there's little to no solution flow in your Tennant Scrubber, start by filling the solution tank if it's empty. A clogged solution tank filter can also cause this issue, so clean it. Additionally, a clogged solution valve might be the culprit; remove the valve and clean it. Ensure that batteries are charged.
Why does my Tennant T5 Scrubber not propel?
If your Tennant Scrubber won't propel, first check if the parking brake is set and release it. Also, avoid steep inclines and reset the key if you have exceeded the maximum incline.
General| Power Source | Battery |
|---|---|
| Sound Level | 67 dBA |
| Machine Type | Walk-Behind Scrubber |
| Battery Voltage | 24 V |
| Machine Width | 24 in / 61 cm |
