Tense EM-07K User Manual

RS485 Modbus RTU (1200 - 38400bps)
71.5 x 61.5 Custom Design Glass LCD
3-phase voltage and 3-phase current transformer.
It shows that V1,V2,V3,V12,V23,V31,I1,I2,I3,P1,P2,P3,S1,S2,S3,F1,F2,F3,kWh,ΣkWh
It shows the minimum, maximum and average values of V1,V2,V3,V12,V23,V31,F1,F2,F3
It shows the maximum, average and demand values of I1,I2,I3,S1,S2,S3,P1,P2,P3
You can delete the demands and active energy records
Menu is password-protected.
Shows phase sequence
EM-07K
USER MANUAL
Tense Electric Electronic
MADE IN TURKEY
Document Number: DK-078-1

Tense EM-07K Specifications

General

Brand	Tense
Model	EM-07K
Category	Controller
Language	English

Summary

Connection Diagrams

Current Transformer Selection and Connection Considerations

General Warnings

Device Maintenance

General Information

Home Screen Introduction

Button Definitions

Device Start-up

Display Information

Navigating Display Inventory

Device Settings

Setup Settings

Configures core device settings like transformer ratios, demand time, and record deletion.

General Settings

Manages user password, password protection, and device access.

RS485 Communication Settings

Sets Modbus device ID and communication baudrate for data transfer.

Device About Information

Displays device serial number and firmware version for identification.

Enter Menu with Password

Changing User Password

Password Enable/Disable

Setting Demand Time

Parameters Overview Table

Device Dimensions

Technical Specifications

Contact Information