15mm Wrench
L
R
Note:
Do not install the pedals
forcibly if you feel great resistance.
01
Distinguish between the left and right
pedals. The right and left pedals are
marked by an R and an L respectively.
The right pedal is used for the side with
the crankset, while the left one is used
for the other side.
02
Tighten the right pedal clockwise and
the left pedal counterclockwise.
03
If you feel great resistance, stop
tightening the pedals. Then, realign
and install the pedals again.
Tools needed: 15mm Wrench
08.
INSTALL THE PEDALS
015 Assemble your TENWAYS e-bike
To Next Page
Loading...
