Tenways CGO009 - Install the Pedals

R
L
b
a
2
Tools needed: No.15 Wrench
01
Separate the left and right pedals, which
are marked by an R and an L respectively.
The right pedal is used for the side with
the crankset, while the left one is used
for the other side.
02
Tighten the right pedal clockwise and
the left pedal counterclockwise.
03
Please stop tightening the pedals if you
feel a lot of resistance. If this happens,
realign and reinstall the pedals.
Note:
Do not force the installation if you
feel a lot of resistance.
No.15 Wrench
Install the pedals 014
05.
INSTALL
THE PEDALS