Tenways CGO009 - Install the Battery

c
a
b
Front View
Side View
01
Tilt and clip the lower end of the battery
into the battery slot, and then press the
upper end in.
02
You will hear a click when the battery is

Tools needed: No.5 Hex Key
Lift the protective cover and use the No.5
Hex Key to loosen the screw. Adjust the
saddle to a suitable height and tighten
the screw torque: 14
 16 Nm.
015 Install the battery
06.
INSTALL
THE BATTERY
CONTROLLER
OPERATIONS