4.10 Error Code Denitions
Common error codes The following information is for reference only. For
details, contact TENWAYS.
E08
E30
Motor hall
signal fault
The panel has received no
data from the controller,
or receives incorrect
information due to
communication failure.
1. Check if the motor cable is properly
connected.
2.
Examine the cable for any obvious
dents or damage.
1. Verify that the CH and CL
communication cables are correctly
connected.
2. Check if the cable harness and
connectors are loose or broken.
Error Code
Description Troubleshooting
033
Operation methods
To Next Page
Loading...
