Daily inspections
• Before riding, check whether the screws in the following key parts are
properly tightened:
1. Screws between the stem and the front fork stem
2. Screws between the stem and the handlebar
3. Screws between the brake lever and the handlebar
4. Screws between the disc brakes and frame or front fork
5. Screws between the discs and bottom brackets
• Use the tools provided to tighten loose screws.
•
maintain the same fastening performance when your e-bike reaches a
200 km riding distance and at every 1,000 km after the initial 200 km.
• We recommend checking the fastening performance of screws at every
600 km of riding if you usually ride under complex road conditions.
049
Routine maintenance
ROUTINE
MAINTENANCE
03.
To Next Page
Loading...
