Tools needed: No.15 Wrench
01
Separate the left and right pedals. The right
and left pedals are marked by an R and an L
respectively. The right pedal is used for the
side with the crankset, while the left one is
used for the other side.
02
Tighten the right pedal clockwise and the
left pedal counterclockwise.
03
Please stop tightening the pedals if you feel
a lot of resistance. If this happens, align and
reinstall the pedals.
Note: Do not force the installation if you feel
a lot of resistance.
b
L R
a
018
INSTALL
THE PEDALS
10.
Install the pedals
To Next Page
Loading...
