MOUNTING
• Mount the transmitter onto the back of your camera keeping the antennas clear of any obstructions.
• Orient the transmitter and receiver antennas so they are parallel to each other.
• For best results, orient the transmitter antennas so each one has clear
line-of-sight to the receiver.
Ranger devices have a 1/4”-20 threaded hole (additional 3/8”-16 threaded hole on the receiver) on the
bottom for mounting the included light stand adapter or any other mounting accessory. Additionally,
Ranger devices are equipped with a dual mount battery plate that allows you to attach your device to
either the back of a camera, monitor, or Array Antenna.
Ranger transmitters
mount to the back
of a compatible
camera
DO NOT OVERTIGHTEN SCREWS INSERTED INTO
THE /”- OR /”- THREADED HOLES.
Doing so can damage the transmitter’s chassis voiding the warranty.
CAUTION:
Ranger receivers
mount vertically
on a light stand
or adapter
6
To Next Page
Loading...
