Need help?Do you have a question about the Teradek Ranger and is the answer not in the manual?
Connect video sources to the transmitter and receiver, and attach power sources.
Connect antennas and switch on both transmitter and receiver for operation.
Details the 2-pin power connector pin assignments for Ranger devices.
Advises on power cable polarity, shorts, and grounding to prevent damage.
Instructions for pairing transmitter and receiver using the device's OLED menu.
Steps to pair devices using the Launchpad application on a computer.
Guide to pairing devices using the Launchpad mobile application.
Describes mounting Ranger devices on cameras, monitors, or array antennas using threaded holes.
Guidance on orienting transmitter and receiver antennas for clear line-of-sight.
Warning against overtightening mounting screws to prevent chassis damage and warranty voiding.
Accessing status screens and understanding basic menu navigation.
Configuring wireless settings, frequencies, and bandwidth for optimal performance.
Managing pairing, Bluetooth, display, and reset options for the transmitter.
Overview of receiver status screens like Main, Time Code, and TX Info.
Navigating receiver menus and configuring settings like Switch TX and Wireless.
Using Spectrum Analyzer and Signal Quality Graph for signal monitoring.
Managing HDMI/SDI output, audio, OSD, and display settings for the receiver.
Using Launchpad for device configuration, pairing, and firmware upgrades.
Details on pairing, settings, color processing, and upgrade procedures.
Steps to connect the Launchpad App to Ranger devices via Bluetooth.
Monitoring transmitter status, input resolution, frequency, and temperature.
Monitoring receiver status, link quality, range, and signal strength.
General| Frequency | 5GHz |
|---|---|
| Video Inputs | HDMI, SDI |
| Video Outputs | HDMI, SDI |
| Latency | < 1ms |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Supported Resolutions | 1080p60 |
To Next Page
