Teradek Ranger - Receiver Menu Configuration; Receiver Status Screens; Receiver Menu Operations; Signal Analysis and Quality

Receiver Status Screens - Cycle through status screens or return from the menu by pressing the
Menu joystick (G).
RECEIVER MENU
• Main Status Screen - This screen displays the status of the wireless receiver, along with the current
video resolution, frequency, and link quality (if connected).
• Time Code Screen - Displays the current time code if received from the transmitter.
• Info Screen - Displays the current voltage and internal temperature of the unit.
• TX Info - Displays the name of the transmitter.
• HDMI Status Screen - Displays the status of your HDMI signal.
Menu Operation - Launch, then navigate through the menu with the Menu joystick (G), or from the
Ranger App (pg. 10).
• Switch TX - Select a dierent transmitter (paired transmitters only).
• Wireless Settings - Configure the transmitter’s wireless settings.
� Enable Fixed Frequency - Fixed Frequency Mode allows your Ranger to designate a specific
non-DFS frequency range for use, providing a stronger connection in dicult environments.
� Allow Licensed Channel - Enable or disable Licensed Channel selection under the Frequencies.
� Select Bandwidth - Choose between 20MHz and 40MHz bandwidth options
� Select Frequency - Select which frequency to use.
• Spectrum Analyzer - Determine which frequencies are available to use.
• Signal Quality Graph - Determine the quality and reliability of the signal being received.
11