August 2016
2 - 4 AL4 • AL4000 Part No. 218567
Section 2 • Specifi cations
Kubota D1105-D3BG Engine
Displacement 68.53 cu in
1.123 liters
Number of cylinders 3
Bore and stroke 3.07 x 3.09 inches
78 x 78.4 mm
Horsepower, gross intermittent 13.6 @ 1800 rpm
10.1 kW
Firing order 1 - 2 - 3
Compression ratio 24:1
Compression pressure 412 to 469 psi
28.4 to 32.3 bar
Idle speed @ no load 1500 rpm
(with 7kw generator)
Frequency 50 hz
Idle speed @ no load 1800 rpm
(with 6kw or 8kw generator)
Frequency 60 hz
Governor centrifugal mechanical
Valve clearance, cold 0.0057 to 0.0072 in
0.145 to 0.185 mm
Engine coolant capacity 3.3 quarts
3.1 liters
Lubrication system
Oil pressure 28 to 64 psi
1.93 to 4.41 bar
Oil capacity (including fi lter) 5.4 quarts
5.1 liters
Oil viscosity requirements
Units ship with 10W-30.
Extreme operating temperatures may require the use of
alternative engine oils. For oil requirements, refer to the
Engine Operator Handbook on your machine.
Injection system
Injection pump make Bosch MD
Injection timing 18° BTDC
Injection pump pressure 1991 psi
137 bar
Fuel requirement
For fuel requirements, refer to the engine Operator's
Manual on your machine.
Standard battery
Type 12V DC
Group 24
Quantity 1
Ampere hour 75 A
Cold cranking ampere 500
Reserve capacity @ 25A rate 65 minutes
Heavy duty battery
Type 12V DC
Group 24
Quantity 1
Ampere hour 75 A
Cold cranking ampere 700
Reserve capacity @ 25A rate 125 minutes
Alternator
Output 40A, 14V DC
Fan belt defl ection
0.28 to 0.35 inch
7 to 9 mm
SPECIFICATIONS
Continuous improvement of our products
is a Genie policy. Product specifi cations are
subject to change without notice.
To Next Page
Loading...
