SERVICE
TRAINING
Terex Backhoe History Summary
Backhoes are manufactured by Terex – Fermec in Manchester, England.
•
1995- Models 750 / 760 / 860 / 965- 4WD & 4W steer, FERMEC with Kobe Steel started marketing
Backhoe loaders in USA As Kobelco thru Kobelco distributors.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
• 1996- Models 750 / 760 / 860 / 965- 4WD & 4W steer, In October FERMEC acquired by Case corporation.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
• 1999- Models 750B / 760B / 860B / 965B, the P100 Series introduced with Danfoss Hydraulics & new
Electrical (relay / fuse) board.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
• 2001- Models TX750 / TX760 / TX860 / TX860SB / TX960 / TX965, Fermec acquired by Terex corporation
In June, Husco Hydraulics and Carraro axles were installed starting at s/n3905 on TX700/800 series only.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, Carraro rear axle.
To Next Page
Loading...