Terex Fermec 760 - SERVICE AND PARK BRAKE OPERATION CHECKS

To Next Page

To Previous Page

71.1

Service

Training

SERVICE BRAKE OPERATION CHECK

Service specification

Check ....................................................................................................... Every 50 hours

Check and adjustment ......................................................................... Every 2000 hours

Service Brake Check (all

models)

STEP 1

Park the machine on flat, level ground and

engage parking brake.

STEP 2

CK98F031

Lock the brake pedals.

STEP 3

Model 750/760/860 Synchroshuttle only

CK98G018

Select second gear then place the

direction of travel control lever in the

forward position. Disengage parking

brake.

Model 860/960/965 Powershift only

PSFNR

Select second gear, then place the

transmission control lever in forward drive.

Disengage parking brake.

STEP 4

CK98F029

Using the accelerator pedal, run the

machine at maximum speed.

STEP 5

CK98F029

Press down on the brake pedals. The

machine should stop smoothly, in a

straight line and the tension on the pedals

should remain firm. If not, consult your

local dealer.