71.2
Service
Training
PARK BRAKE OPERATION CHECK
Service specification
Check ....................................................................................................... Every 50 hours
Check and adjustment ......................................................................... Every 2000 hours
Parking Brake Check (all
models)
STEP 1
Engage the parking brake and start the
engine.
STEP 2 Model 750/760/860 Synchroshuttle only
Place the gear change lever in third gear,
then place the direction of travel control
lever in forward drive. The audible warning
device will sound.
STEP 2 Model 860/960/965 Powershift only
Select third gear, then place the
transmission control lever in forward drive.
STEP 3
Using the accelerator pedal, increase the
engine speed to about 1800 rpm. The
machine must not move. If the machine
moves, adjust the brake.
See “Parking Brake Adjustment”
To Next Page
Loading...