Terex Fermec 760 - ENGINE SPECIFICATIONS; ELECTRICAL SYSTEM COMPONENTS; CAB FEATURES; MACHINE WEIGHT SPECIFICATIONS

6
Service
Training
SPECIFICATIONS
ENGINE (MODEL 760)
• Make and type................................................................................... PERKINS 1004-40T
• Displacement...........................................................................................................4 liters
• Number of cylinders ........................................................................................................ 4
• Bore and stroke .......................................................................................... 100 x 127 mm
• Injection system.......................................................................................FASTRAN direct
• Compression ratio ................................................................................................. 17.25:1
• SAE J 1349 horsepower.........................................................86 hp (64 kW) @ 2200 rpm
• ISO 9249 horsepower ............................................................79 hp (59 kW) @ 2200 rpm
• ISO 9249 maximum torque ........................................251 ft lbs (341 Nm) @ 1350 rpm
ELECTRICAL SYSTEM
• Voltage ..................................................................................................................12 volts
• Battery (single) ..................................................................................12 volts (115 amp/h)
• Battery (double).................................................................................. 12 volts (72 amp/h)
• Alternator............................................................................................. Standard - 70 amp
• Air conditioning - 100 amp
CAB
• ROPS and FOPS type (with protection against rolling over and falling objects).
• Tinted safety glass – wide glazed surface giving total visibility.
• Operator’s seat with adjustable suspension. Class III as per 1980 ISO/DIS 7096.
• Fresh air heater/blower unit, full heating control including demist on front and rear windows. Optional air conditioning.
MACHINE WEIGHT
• Maximum authorized weight................................................................... 3944lb (8700 kg)
TRANSMISSION
• Torque converter - Two phase, integrated with engine flywheel. Stall ratio .................... 2.87 to 1
• Gearbox - TURNER Synchroshuttle with 4 synchronized gears, 4 forward and 4 reverse gears (Specific to certain countries,
the fourth gear is not fitted). Electrical transmission cut-out using push button on gear change lever or loader control lever.
• Travel speed
Speeds in forward and reverse with engine speed at 2200 rpm.
Contents