First Edition • Third Printing Operator's Manual
Inspections
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 39
Inspection for Decals with
Symbols
Determine whether the decals on your machine
have words or symbols. Use the appropriate
inspection to verify that all decals are legible and
in place.
Decal Description
43618 Label – Directional Arrows
72086 Label – Lifting Point
72143 Label – Emergency Stop
82481 Label – Battery/Charger Safety
Label – Emergency Stop, Platform
Label – Drive/Steer Direction,
1272242 Label – Machine Registration
Label – Lanyard Anchorage Point,
Fall Arrest/Fall Restrained
1283810 Label – Platform Control Panel
Label – Emergency Lowering
1292990 Label – Release Brake
Label – Ground Control Panel,
1296034 Label – Smartlink Dual Zone
1298467 Label – Read the Manual*
1304177 Label – Wheel Load GS-1932m*
Label – Transport Diagram,
Label – Tip-over Hazard, Batteries,
Label – Compartment Access,
Decal Description
1305410 Label – Transport Tie Down
1305411 Label – Hazard, Safety Arm, Symbol
1305412 Label – Safety Arm, Symbol
1305413 Label – Danger, Electrocution Hazard
1305414 Label – Read the Manual
1305415 Label – Charge Status Ind.
1305420 Label – Airline 110 PSI*
1305421 Label – Tip-over Hazard, Tilt Alarm
1305424 Label – Direction Arrows*
1305425 Label – Electrocution Hazard, Plug
Label – Brake Release Safety and
1305437 Label – Power to Platform, Aktio*
1305496 Label – Power to Charger, Aktio*
Label – Hydraulic Tray Open
1306901 Label – Tip-over Hazard, Limit Switch
Label – Plat. Overload, Max Cap.,
Side Force*
Label – Electrocution Haz., Danger,
1307117 Label – Wheel Load GS-1432m*
Decal – Platform Overload and
Maximum Capacity Side Force, 1
1308331 Decal – GS-1932m Lite
Decal – Label, Wheel Load,
Shading indicates decal is hidden from view, i.e.
under covers
* These decals are model, option or configuration
specific.
To Next Page