Recovery, Loading and Transporting6
60/112 TL160
Operating Manual 12.9.08 Version 1.0
Releasing the spring-loaded brake
• Switch on the ignition (31/61)
• Release the spring-loaded brake by operating the
switch (31/54).
• If the spring-loaded brake cannot be released,
release it in both axles by screwing in the adjusting
screws (32/1).
Fig. 31 Releasing the parking brake
00014,0 h
12 Km/h
0
4/4
1/2
+
-
P
00014,0 h
12 Km/h
0
4/4
1/2
+
-
P
54
61
Attention
After towing, re-adjust the spring-loaded
brake as specified in Chapter
Î
7.8.9.3, 91.
Fig. 32 Releasing the spring-loaded brake
To Next Page
