Tescom ER3000 - Monitor Internal Sensor Using the Analog Output; Figure 18: Monitor Internal Sensor (4-20 Ma Wiring); Figure 19: Monitor Internal Sensor (0-10 V Wiring)

4. Installation 27
4.5.9 Monitor Internal Sensor using the Analog Output
The ER3000 provides the capability of monitoring the internal sensor. Figure 18
shows the 4-20 mA wiring option.
This feature is only available on models that supply the analog output of the
internal sensor, as referenced in Section 3 (ER3000 Model Description).
Figure 18: Monitor Internal Sensor (4-20mA wiring)
Figure 19: Monitor Internal Sensor (0-10V wiring)
NOTE: Wire power as shown in figures 2 & 3