IN THE BOX
Main Unit
Wirebox
Wirebox Mounting Template
Hex Bit (4 mm)
Zip tie (x1)
Wall Connector-to-
Wirebox Fastener (x4)
Wirebox-to-Wall Fastener
(x2)
4.0 x 50 mm (PZ2)
(#8 x 2 in)
Quickstart Guide (contains
sticker with SSID network
name and unique password)
NOTE: The hex bit, zip tie, and fasteners are located in a plastic bag inside the wirebox, which comes
attached to the main unit of the Wall Connector.
NOTE: Wall plugs are not included. If installing in concrete or other like materials, use 6 mm wall plugs.
17Gen 3 Wall Connector Manual
To Next Page
Loading...
