Tesla Gen 3 - Error Codes

WALL CONNECTOR LEDS
Light Codes
Startup
Once energized at the circuit breaker, every LED (seven total) on the faceplate will illuminate for one second.
Other
After startup,
waiting for
commissioning
Standby, waiting to
plug in
Charging in
progress
SSID broadcasting,
ready to
commission
Waiting to charge,
communicating
with vehicle
Solid yellow (green
+ red)
Top green solid
Every green
streaming
Green pulsing Blue solid
NOTE: If a red dot is displayed, connect to Wall Connector Commissioning or see next table for all error
codes.
29Gen 3 Wall Connector Manual