Tesla Gen 3 - TOOLS; Required Tools; Optional Tools

TOOLS
Required Tools
NOTE: Drill bit sizes assume wood mounting surfaces. If installing on concrete or other masonry, consult with
an electrician for optimal pilot hole sizes.
Torque Driver (5.6 Nm, 50 lbf . in)
Multimeter
Stud Finder
(If installing on wood walls)
Tape Measure
Wire Stripper
Drill Bit, 5 mm (3/16 in)
(If installing on wood
walls)
Drill Bit, 2.5 mm (3/32 in)
(If installing on wood walls)
Bit Driver
Level
Smartphone (with Wi-Fi) Power Drill
Optional Tools
Step Bit, 29 mm (1-1/8 in) Step Bit, 35 mm (1-3/8 in)
Computer (with Wi-Fi)
18Gen 3 Wall Connector Manual