INSTALLATION CONSIDERATIONS
Wall Connector may be installed on any flat, vertical surface capable of supporting its weight (e.g. wall,
pedestal, etc.). Wall Connector (wirebox, faceplate, and long cable) weighs 6.8 kg (15 lb).
Choosing Location
Install Wall Connector in a location that allows the charge cable to reach the vehicle charge port without
putting strain on the cable.
• Dark gray: Recommended installation area for Wall Connectors with 7.3 m (24 ft) cable
• Light gray: Recommended installation area for Wall Connectors with 2.6 m (8.5 ft) cable
Install Wall Connector in a location with ample clearance on all sides to allow the charge cable to loop
around the unit and the charge handle to comfortably land in the side dock.
NOTE: If constrained by space, a cable organizer can be installed near the Wall Connector.
19Gen 3 Wall Connector Manual
To Next Page
Loading...
