5 First steps
14
3. Insert batteries. Adhere to the polarity.
4. Insert the battery holder into the battery compartment.
5. Secure battery compartment with screw.
6. Switch instrument on: Press [].
- Display test is carried out: all segments light up.
- The instrument switches to the measuring mode.
- 000 lights up on the display, the instrument is ready for use.
7. If necessary, switch instrument off.
Pos: 47 /TD/Erst e Schritte/testo 275/ Aufbewahrung @ 15\mod_1 407407083273_79.doc x @ 194414 @ 5 @ 1
For storage of the instrument
Suspension attachment
To Next Page
Loading...
