TESTO 270 User Manual

5 First steps
18
Pos: 57 /TD/Erst e Schritte/testo 275/ Gerät konfigurier en (testo 275) @ 15\mod_1407410 840205_79.doc x @ 194589 @ 35 @ 1
5.2.3. Configuring the instrument
Setting options in the configuration mode
Configurations Setting options
Setting the TPM limit values
Alarm, Alarm
Lower TPM limit value Alarm
Upper TPM limit value Alarm
Carry out calibration
CAL
no: Do not carry out calibration.
yes: Carry out calibration.
Automatically hold readings
Auto-Hold
on: Readings are automatically
held by the instrument.
off: Readings are not
automatically held.
Automatically switch off the
instrument Auto-off
on: Instrument switches off
automatically after 2 or 10 mins.
off: No automatic switch-off.
Set alarm indicator
Alarm
on: Alarm indicator activated
off: Alarm indicator deactivated
Set temperature unit
°C, °F
°C or °F
Lock configuration, including
TPM limit values
PIN
no: Do not lock configuration.
yes: Lock configuration
Carry out reset
rst
no: Do not reset the adjustment
value to the factory setting.
yes: Reset the adjustment value
to the factory settings.
Firmware version
Firmware versions of the product
components are shown.
Pos: 58 /TD/Erst e Schritte/testo 275/ Konfiguration durc hführen (testo 275) @ 15\ mod_1407413778547_79. docx @ 194694 @ 5 @ 1
Carrying out the configuration
Requirement: The instrument is switched off.
1. Switch the instrument on.
> [Hold] hold down and press [].
- When the configuration menu is locked, PIN lights up.
> To unlock, set the last two figures of the serial number with [
] or [].

TESTO 270 Specifications

General

Brand	TESTO
Model	270
Category	Test Equipment
Language	English