5 First steps
21
If an incorrect PIN is entered, the instrument switches into
measuring mode.
- The configuration mode is enabled for the duration of the
settings being carried out.
Deactivate PIN:
> Go through the configuration mode with [Hold], until PIN
and yes or no light up in the display.
> Deactivate PIN: Select no with [] or [].
- Settings can be carried out without entering the PIN.
Pos: 61 /TD/--- Seitenwechsel --- @ 0\mod_1173774430601_0.d ocx @ 283 @ @ 1
To Next Page
Loading...
