TESTO 440 - Data Management and Export

3 Operation
18
1
Use to select the Date/Time.
2
Press or on the navigation key.
3
Use to select the required settings.
4
Press
or to exit the menu.
3.3.6 Setting the language

You need to go to menu screen first and then select Settings.
4
Use to select Language.
5
Press or on the navigation key.
6
Use to select the required Language.
7
Confirm by clicking .

Exit from the menu is automatic and the language is applied.
When the unit system is changed, the units specified in the Basic View
are overwritten.
3.3.7 Showing general device information
Under the General menu item, you will find all of the information about the
testo 440 and connected probes. You can also reset the instrument to default
settings.

You need to go to menu screen first and then select Settings.
1
Use to select General.
2
Press or on the navigation key.
The following information can be viewed: