3 Operation
38
2
Use to select the required parameter and make settings.
3
Press
or to exit the menu.
Carrying out the measurement
Two suitable probes are connected to the measuring instrument.
1
Place the SA-configured probes in the supply air of your system.
2
Place the RA-configured probes in the exhaust air of your system.
3
The humidity and temperature values for supply air and exhaust air
are shown on the display with the heating/cooling load calculated
from these.
4 Carry out the measurement and save the measuring values.
3.5.10 Mold indication application [Mold Indication]
Use this application to measure the risk of mold in rooms.
The application menu is enabled by the following probes:
Order number Name
0636 9771 High-precision temperature-humidity probe with
Bluetooth
®
0636 9772 High-precision temperature-humidity probe, fixed
cable
0636 9731 Temperature-humidity probe with Bluetooth
®
0636 9732 Temperature-humidity probe, fixed cable
0632 1551 CO2 probe with Bluetooth
®
, including temperature
and humidity sensor
0632 1552 CO2 probe including temperature and humidity
sensor, fixed cable
0615 1712 Robust air probe – with NTC temperature sensor
0615 4611 Temperature probe with Velcro and NTC temperature
sensor
0560 1805 testo 805i - infrared thermometer operated by
smartphone
To Next Page
Loading...
