TESTO 560i - Switching the instrument on and off

7 First steps
9
When not in use for a long period: Take out the batteries.
Inserting batteries in the testo Smart Valve
1
Unfold the suspension hook and open the battery compartment (clip
lock).
2
Insert the battery (supplied, block battery) into the battery
compartment. Observe the polarity!
3
Close the battery compartment.

After inserting the batteries, the instrument switches on automatically
and is in Bluetooth
®
connection mode.
In Bluetooth
®
connection mode, connection can be established to the
testo Smart App or to a testo 550s or testo 557s manifold.
Do not change or remove batteries during operation, otherwise the
charging process will be interrupted.
When not in use for a long period: Take out the batteries.
7.2 Switching the instrument on and off
Switching on testo 560i
1
Press the ON key.

The instrument switches on and is in Bluetooth
®
connection mode.
In Bluetooth
®
connection mode, connection can be established to the
testo Smart App or to a testo 550s or testo 557s manifold.
2
Press and hold the ON key.

The instrument is switched off.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com