TESTO 560i - Technical data for testo Smart Valve; Tips and assistance; Accessories; Support

9 Maintenance
42
9.6 Changing batteries
Changing batteries in the testo 560i scale
✓
The instrument is switched off.
1
Open battery compartment.
2
Remove spent batteries and insert new ones (4 x 1.5V, type AA /
Mignon / LR6) into the battery compartment. Observe the polarity!
3
Close the battery compartment.

After inserting the batteries, the instrument switches on automatically
and is in Bluetooth
®
connection mode.
In Bluetooth
®
connection mode, connection can be established to the
testo Smart App or to a testo 550s or testo 557s manifold.
Do not change or remove batteries during operation, otherwise the
charging process will be interrupted.
When not in use for a long period: Take out the batteries.
Changing the batteries in the testo Smart Valve
✓
The instrument is switched off.
1
Unfold the suspension hook and open the battery compartment (clip
lock).
2
Remove the spent battery and insert a new one (1 x 9.0V (6LR61)
block battery) into the battery compartment. Observe the polarity!
3
Close the battery compartment.

After inserting the batteries, the instrument switches on automatically
and is in Bluetooth
®
connection mode.
In Bluetooth
®
connection mode, connection can be established to the
testo Smart App or to a testo 550s or testo 557s manifold.
Do not change or remove batteries during operation, otherwise the
charging process will be interrupted.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com